Parker SSD 650 Series AC Inverter for 2.2kW (3.0HP) 230V 3 Ph motor in sensorless vector control to 9.6A. Converts fixed frequency single phase 230V input (or three phase 230V) to variable frequency three phase 230V for a standard AC Induction motor.
Size 3: 96mm Wide x 200mm Deep x 260mm High. IP20
Weight: 2.7kg.
Overload: 150% x 30 seconds
Speed Control Range: 0-240Hz
Braking: 100% duty into minimum 56 Ohm external resistor.
Includes operator keypad (remote mounting option).
2 Analogue Inputs, 4 Digital Inputs (2 configurable as Digital Outputs), 1 Analogue Output, 1 Relay Contact set, Motor Thermistor terminals, RJ11 port for RS232 communications.
Single Phase Input Current: 22.0A - Three Phase Input Current: 14.3A.
Input Voltage: 220-240V Single Phase ±10% at 50-60Hz ±10%
EMC Filters: IEC 61800-3 First Environment (Domestic).
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified] - Ventilation space above and below: 100mm - Ventilation space at sides: 0mm.
Heat Loss at max output: 112W.
Mounting via 35mm DIN rail or 2 x holes for M5 bolts at rear on 242mm centres.
Manufacturer part number is 650V-22196030-BF1P00-A2. Legacy part number was 650V/022/230/F/00/DISPR/UK/RS0/0. Exactly the same as part number 650V/022/230/F/01/DISPR/UK/RS0/0 in all but livery.
This product has been sold under many other names including; Eurotherm Drives, SSD, KIMO, RS Components, Baldor and Newlec.
Download the Parker SSD 650V Quick Start Guide and Manual from the links below:-