SSD 690+ AC Frequency Inverter 0.75kW (1HP) without EMC filter to 4.0A for 230V 3 Ph motors in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Use this drive for 0.55kW (0.75HP) and 0.37kW (0.5HP) motors also. Simple set-up and ready to run in VxF from its default settings.
Size B - 177mm Wide x 181mm Deep x 233mm High.
Overload - 150% x 60 seconds.
Speed Control Range - 0/120Hz (default), 0/240Hz or 0/480Hz.
Braking - 100% duty into minimum 56 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current - 11A.
Input Voltage - 220/240V Single phase +-10% at 50/60Hz.
Input fuse - 12A to suit input bridge at 425A²s
Cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 80mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 80W.
Mounting - M4 screw fixings on 129.5mm x 223mm centres.
Full part number is - 690-211400B0-B00P00-A400 Was - 690PB-0007-230-1-0-0011-UK-0-0-0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 690PB-0007-230-1-0-0011-UK-0-0-0-0-0.
The menu uses simple to understand English-language terms to describe its selection and functions. The default is English, but can be changed to German, French, Spanish, Italian, Polish, Swedish and Portuguese, by going to 'System', then 'Languages' and selecting the language required.
Replaces:- 605/0007/230/1/0/0011/UK/000 Often used to replace 5526/310 PID auxiliary unit and most of the 5528 rack assembly functions.