Your Cart is empty!
Brand: Mitsubishi, Range: FR-E700
Mitsubishi FR-E700 Series AC Frequency Inverter for 2.2kW (3HP) 3 Phase motor in VxF or Sensorless Vector control to 11A. Simple set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Size 3C - 140mm Wide x 155.5mm Deep x 150mm High. IP20 Overload - 150% x 60 seconds, 200% x 3 seconds Speed Control Range - 0.2Hz to 400Hz Braking - To 60 Ohm minimum external resistor (not supplied) - use the Which Resistor button on this page. 2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact Sets, Modbus RTU, integrated USB port. Input Current - 22.6A. Input Voltage - 200-240V Single Phase +10% -15% at 50/60Hz &plusmn EMC Filters - Not included (see linked products below for external EMC filter module) Wall mount in clean environment or cubicle mount. Rated -10° to 50°C Ambient. Ventilation space in front - 10mm Ventilation space above and below - 100mm. Ventilation space at sides - 0mm (10mm when surrounding air temperature exceeds 40°C). Mounting via 4 x 5mm diameter holes at rear on 128mm x 138mm centres. Full part number is - FR-E720S-110-EC See below for replacement Can be used as an alternative or to replace FR-E720S-2.2K, FR-E720S-110-NA or FR-E720S-2.2K-CHT subject to the differences detailed in the FR-E700 Overseas Specification Comparison document (see link to PDF below). Download the Mitsubishi E700 Manual and Installation Guide from the links below:
FR Configurator-M + FR-Configurator2
(275503)
Order code: 28972
4 in stock
5+ normally 6 weeks
We've sent you a message containing a confirmation link. Click the link to complete the process.