Mitsubishi FR-E700SC Series AC Frequency Inverter for 0.37kW (0.5HP) 3 Phase motor in VxF or Sensorless Vector control to 3A. Simple set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Size 1B - 68mm Wide x 148.5mm Deep x 128mm High. IP20
Overload - 150% x 60 seconds, 200% x 3 seconds
Speed Control Range - 0.2Hz to 400Hz.
Braking - To 200 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact Sets, Modbus RTU, integrated USB port.
'Safe Torque Off' (STO) function to SIL 2
Input Current - 6.5A.
Input Voltage - 200-240V Single Phase +10% -15% at 50/60Hz ±5%
EMC Filters - Not included (see linked products below for external EMC filter module)
Cubicle mount.
Rated -10° to 50°C Ambient.
Ventilation space in front - 10mm
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (10mm when surrounding air temperature exceeds 40°C).
Mounting via 3 x 5mm diameter holes at rear on 56mm x 118mm centres.
Full part number is - FR-E720S-030SC-EC
This is the replacement for the obsolete FR-E720S-030-EC
Can be used as an alternative or to replace FR-E720S-0.4K, FR-E720S-030-NA or FR-E720S-0.4K-CHT subject to the differences detailed in the FR-E700 Overseas Specification Comparison document (see link to PDF below).
Download the Mitsubishi E700 Manual and Installation Guide from the links below:-