Mitsubishi Automation CS80 Series AC Frequency Inverter for 2.2kW 230V 3 Ph motor in VxF or Sensorless Vector control to 4A. Converts single phase 230V input to three phase 230V for a standard AC Induction Motor
Size 2b: 108 mm wide x 160 mm deep x 128 mm high
Protection: IP20; PCB’s coated to 3C2 standard
1.4kG
Output: 4A, 2.2kW at 230V
Overload: 150% for 60 Seconds, 200% for 0.5 seconds.
Speed Control Range: 0.2 to 400Hz.
Braking (DBr): Not Fitted, optional external braking unit can be fitted if required
Fixed Keypad. Optional door mounted keypad is available
2 x Analogue Inputs, 5 Digital Inputs, 0 Analogue outputs, 1 Relay Contact set and 0 digital outputs
Fieldbus: RS485, MODBUS RTU Protocol via PU Connector
Programmable from the Keypad, PC via FR-Configurator2 software (converter required) or from the 10 key hand-held parameter unit (see Linked Products below)
Safety Features: None; STO is not fitted
EMC Filter: None (Unfiltered). See linked products below for external footprint EMC Filter Module
Input Rating: 5.2kVA; 40A MCCB recommended
Input Voltage: 200-240V single phase (170V min to 264V max) at 50/60Hz +/- 5%.
Cubicle Mount
Ambient Temperature: 40°C; 50°C maximum with de-rating
Mount via 2 x 5mm hole (top) and 2 x 5mm slots (bottom) on 118mm (H) x 96mm (W) centres. Can be DIN mounted with optional mounting kit
Ventilation Space: 100mm above, 100mm below, 10mm at sides and 10mm in front.
Heat Loss at max output: 95W.
Full part number is: FR-CS82S-100-60, Alternative Part Number: 325719. New Product does not replace any previous generation