Nidec Control Techniques Unidrive M101 series AC Inverter for 3kW (4HP) 230V 3ph motor in VxF or sensorless vector control to 13.3A. Converts fixed frequency 230V Single or three phase input to variable frequency 230V three phase for a standard AC Induction motor.
**Available from stock only**
Size 4: 115mm wide x 186mm deep x 277mm high; IP20
Mounting via 4 x 6mm diameter holes at rear on 86mm x 265mm centres
Weight: 3.13kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (Does not have to be used; available if required)
100% duty into minimum 22 Ohm, maximum 50 Ohm external resistor (not supplied). See linked products below or compatible resistor.
Fixed keypad with potentiometer, 1 Analogue Input, 3 Digital Inputs, 1 Digital Input/Output, 1 Relay Contact (normally open), no Analogue Outputs, no communications.
STO: Not available on this model.
Input Current: 23.7A/16.9A
Input Voltage: 200V-240V Single or Three Phase ±10% at 50-60Hz ±5%
Earth Leakage for EMC: 21.3mA/9.7mA at 50Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cable lengths to 10m. Filter can be removed if required.
Cubicle mount.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Heat Loss at max output: 110W (at rated ambient temperature and default switching frequency).
Manufacturer part number is M101-04200133. Equivalent to M100-04200133. Previously marketed as Emerson Control Techniques, a division of Emerson. Now sold as Nidec Control Techniques, part of the Nidec group.
Download the CT Unidrive M101 Quick Start, Installation and Control guides from the links below:-