Lenze i510 Series AC Inverter for 0.25kW (0.33HP) 230V 3 Ph motor. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor. Operates in standard VxF or Sensorless Vector mode up to 1.7A, 150% Overload.
**Item available from stock only; replacement is now supplied with coated PCB's**
Output rating to 1.7A
Overload: 150% x 60 seconds; 200% x 3 seconds.
Size A: 60mm Wide x 130mm Deep x 183mm High. IP20.
Weight: 0.8kg.
Speed Control Range: 0-599Hz
Braking: No Dynamic Braking
DC Bus Terminals: None
No operator keypad included; see linked products below.
2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output (Open Collector not Volt Free), 1 x Volt Free Change Over Contact (240V, 3A Max)
Communications Option included: CANOpen or Modbus (Selectable)
Input Current: 4A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 First Environment C2 (Commercial).
Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 50mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 15W.
Mounting via 2 x 5mm diameter holes at rear on 165mm centres (Not DIN Mounted).
Manufacturer part number is i51AE125B10010001S or i510-C0.25/230-1.
Download the Lenze i510 Manual from the link below:-