LSLV S100 series AC Inverter for 0.75kW (1HP) 230V 3 Ph motor to 5A at high overload, or 1.5kW (2HP) to 6A when Fan/Pump rated. Operates in VxF or Sensorless Vector mode and converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC induction motor.
Size B: 100mm Wide x 140mm Deep x 180mm High. IP20
Weight: 1.3kg.
Overload: 150% x 60 seconds, (High Overload)Overload: 120% x 60 seconds (Fan/Pump rated)
Speed Control Range: 0-400Hz
Braking: Minimum 150 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Built-in Safe Torque Off (STO)
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Outputs, 1 Digital Output, 1 Relay Contact sets, DC Bus +/- Terminals.
'Safe Torque Off' (STO) function to SIL 2 (EN 61508) via Digital Input.
Input Current: 9.3A (high overload), 11.7A (fan/pump rated)
Input Voltage: 200-240V Single Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3, (Class A) Industrial. Can Be disabled via connector switch if nescessary
Cubicle mount.
Rated 50°C Ambient (high overload), 40°C ambient (fan/pump rated).
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 50mm.
Ventilation space between: 2mm
Heat Loss at max output: [not specified]
Mounting via 4 x 4mm diameter holes at rear on 90mm x 170mm centres.
Manufacturer part number is LV0008S100-1EOFNS, LSLV0008S100-1EOFNS (LV0008S100-1E0FNS)(LSLV0008S100-1E0FNS)
Download the LS S100 Manual from the links below:-