Invertek Optidrive E3 IP20 series AC Inverter for 1.5kW (2HP) 230V three phase motor in VxF or sensorless vector control to 7A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a IE2, IE3 or IE4 standard AC Induction Motor, Permanent Magnet motor, Brushless DC Motor or Synchronous Reluctance Motor.
Size 2: 110mm Wide x 150mm Deep x 221mm High. IP20.
Weight: 1.7kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking (DBr): To 100 Ohms minimum external resistor (not supplied) - see resistor option linked below or use the "Which Resistor" button on this page.
Integrated operator keypad with LED display, 2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485.
Input Current: 12.9A
Input Voltage: 200-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Compliance (C1 EMC): IEC EN61800-3:2004 Category C1 (Industrial and Domestic).
Cubicle mount.
Rated 50° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 75mm
Ventilation space at sides: 50mm
Mounting via 4 x 5.5mm holes at rear on 63mm x 209mm centres.
Manufacturer part number is ODE-3-220070-1F42. Replaces Optidrive E2 of equivalent rating.
Made in the UK.
Download the Invertek Optidrive E3 Manual from the link below:-