Invertek Optidrive E2 AC Frequency Inverter for 4kW (5HP) 230V 3 Ph motor in VxF control to 16A. Simple to set up and converts single phase 230V input to 3 phase 230V for a standard AC Induction motor.
Frame 3 Size - 131mm Wide x 175mm Deep x 261mm High, IP20
Overload - 150% Output Current (22.5A) x 60 seconds, 175% x 2 seconds
Speed Control Range - 0/500Hz.
Braking - To 50 Ohm minimum external resistor (not supplied) - use the 'Which resistor' button on this page.
Features - 2 Analogue/Digital Inputs, 2 x Digital Inputs (4 total), 1 x Analogue/Digital Output, 1 Relay Contact set.
Parameter setting via integral keypad, remote keypad (optional) or from a PC via 'OptiStore' software (RS485 to USB cable required - see linked products below)
Parameter setting from compatible Windows based PDA or Smartphone cable-free via 'OptiWand' software
EMC Filters to EN61800-3 category C2 for 1st environments (domestic) for screened cable lengths of up to 5m (add Optifilter for lengths above 5m).
EMC Filters to EN61800-3 cat C3 (2nd environment - Industrial) for screened cable lengths of up to 25m.
Input Current - 31.7A
Input Voltage - 200-240V ± 10%
Wall mount in clean environment or cubicle mount.
Rated at 50°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 50mm.
Mounting onto symmetrical DIN rail or use the screw fixings for mounting at rear.
Full part number is - ODE-2-32040-1KB42
Made in the UK.
Download the Invertek Optidrive Manual from the link below:-