Invertek Optidrive P2 IP20 Series AC Inverter for 2.2kW (3HP) 230V 3 Ph motor to 10.5A. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when the optional Encoder Feedback card is fitted). Converts fixed frequency Single Phase 230V input to variable frequency 230V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
Dimensions: Size 2 112mm Wide x 185mm Deep x 211mm High.
Enclosure rating: IP20.
Weight: 1.8kg.
Overload: 150% x 60 seconds.
Speed Control Range: 0-500Hz.
Braking: To 35 Ohm minimum external resistor (not supplied), see the Resistor options linked below or use the 'Which Resistor' button on this page.
TFT Display (High Definition LCD Display)
2 Analogue Inputs, 3 Digital Inputs, 2 Analogue/Digital Outputs, 2 Relay Contact Sets. Additional I/O expansion options are available, see the linked products below.
DC Bus terminals for DC supply or common bus energy saving applications.
Terminals for Safe Torque Off (EN62061 SIL Level 2), RJ45 RS-485/Modbus RTU/CANopen communications socket.
Input Current: 19.5A.
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%.
EMC Filters: IEC EN61800-3:2004 Category C1 (Domestic).
Mounting: Cubicle mount via 4 x slotted holes at rear for M4 screws on 63mm x 209mm centres.
Ambient: Rated 50°C.
Ventilation space in front: [Not Specified].
Ventilation space above and below: 75mm.
Ventilation space at sides: 50mm.
Part Number: ODP-2-22220-1KF42-MN. Replaces ODP-2-22220-1KF42-SN (With LED Display)
Made in the UK.
Download the Invertek Optidrive P2 Manual and Advanced User Guide from the links below:-