Invertek Optidrive E3 IP20 series AC Inverter for 11kW (15HP) 230V three phase motor in VxF or sensorless vector control to 46A. Converts fixed frequency three phase or single phase 230V input to variable frequency 230V to control the speed of a IE2, IE3 or IE4 standard AC Induction Motor, Permanent Magnet motor, Brushless DC Motor or Synchronous Reluctance Motor.
Size 4: 171mm Wide x 212mm Deep x 420mm High. IP20.
Weight: 9.1kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: To 10 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Integrated operator keypad with LED display, 2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485.
Input Current: 50.1A
Input Voltage: 200-240V Three Phase ±10% (max 240V) at 50-60Hz ±5%
Or from a single phase supply at up to 50% of maximum rated output current capacity (In this case, the AC power supply should be connected to L1 (L) and L2 (N) power connection terminals only)
EMC Compliance (C2 EMC): IEC EN61800-3:2004 Category C2 (Industrial and restricted Domestic).
Cubicle mount.
Rated 50° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 100mm
Ventilation space at sides: 50mm
Mounting via 4 x M8 at rear on 125mm x 400mm centres.
Manufacturer part number is ODE-3-420460-3F42. Replaces Optidrive E2 of equivalent rating.
Made in the UK.
Download the Invertek Optidrive E3 Manual from the link below:-