Invertek Optidrive E3 IP66 series AC Inverter for 2.2kW (3HP) 230V three phase motor in VxF or sensorless vector control to 10.5A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a IE2, IE3 or IE4 standard AC Induction Motor, Permanent Magnet motor, Brushless DC Motor or Synchronous Reluctance Motor.
Size 2: 188mm Wide x 187mm Deep x 257mm High. IP66.
Weight: 4.1kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking (DBr): To 50 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Integrated operator keypad with LED display, 2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485.
Input Current: 19.2A
Input Voltage: 200-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Compliance (C1 EMC): IEC EN61800-3:2004 Category C1 (Industrial and Domestic).
Wall mount.
Rated 40° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x M4 bolts at rear on 176mm x 200mm centres.
Manufacturer part number is ODE-3-220105-1F4X. Replaces Optidrive E2 of equivalent rating.
Made in the UK.
Download the Invertek Optidrive E3 Manual from the link below:-