Invertek Optidrive E3 IP66 0.75kW AC Inverter Drive for Single Phase 230V motor

Invertek Optidrive E3 IP66 series AC Inverter for 0.75kW (1HP) 230V single phase motor in VxF or sensorless vector control to 7A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a Single Phase Cap Run (permanent-split capacitor) or shaded pole motor. Not suitable for use with high starting torque motors shch as Cap Start (cap cap)

** Available from stock only** See linked products below for replacement product.

Dimensions: Size 1, 161mm Wide x 179mm Deep x 232mm High.
Enclosure Rating: IP66.
Weight: 3.1kg.

Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: None.

Integrated Operator keypad with LED display.
Features: 2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485.
Input Current: 9.3A
Input Voltage: 200V-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Compliance: EN61800-3 Category C1 (Industrial and Domestic).  The Filter cannot be disabled.

Mounting: Wall mount or Cubicle mounting.
Ambient Temperature: Rated 50° C (non enclosed).
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting:  via 4 x 8mm holes at rear on 148.5mm x 162mm centres.

Manufacturers part number: ODE-3-120070-1F1X-01. Replaces ODE-2-12075-1KB1X-01.
Made in the UK.

Download the Invertek Optidrive E3 Manual from the link below:-