Invertek Optidrive E2 IP20 series AC Inverter for 4kW (5HP) 230V three phase motor in VxF control to 16A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a standard AC Induction Motor.
The Optidrive E2 has been superseded by the Optidrive E3.
The manufacturer recommends that customers migrate to the E3 as soon as possible as this is a direct replacement.
See linked product below for equivalent rating.
Size 3: 131mm Wide x 175mm Deep x 261mm High. IP20. This rating is not UL approved.
Weight: 3.2kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: To 50 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Brake Resistor Calculator' link at the bottom of this page.
Integrated operator keypad with 6-digit LED display, 2 Analogue/Digital Inputs, 2 Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU communications over RS485 or PC Connection to OptiTools Studio software.
Input Current: 30.5A
Input Voltage: 200-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters.
Cubicle mount.
Rated 50° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 100mm
Ventilation space at sides: 50mm
Mounting via 4 x holes for M4 bolts at rear on 80mm x 247mm centres.
Manufacturer part number is ODE-2-32040-1K042. Equivalent to HP model number ODE-2-32050-1H042.
Made in the UK.
Download the Invertek Optidrive E2 Manual from the link below:-