IMO Jaguar Cub Series AC Frequency Inverter for 0.4kW (0.5HP) 230V 3 Ph motor to 3A. Operates in VxF or Sensorless Flux Vector control and converts single phase 230V input to three phase 230V for a standard AC Induction motor
Size 1 - 80mm Wide x 117mm Deep x 120mm High. IP20
Weight: 0.7kg.
Overload - 150% x 60 seconds, 200% x 0.5 seconds.
Speed Control Range: 0-400Hz.
Braking - To 100 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Digital Output, 1 Relay Contact Set. RS485 / Modbus RTU (optional).
Input Current - 5.4A.
Input Voltage - Single Phase 200-240Vac at 50/60Hz
EMC Filters to EN61800-3 2nd Environment (Industrial).
Cubicle mount.
Rated 50°C Ambient.
Ventilation space in front - [Not Specified]
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm at 40°C Ambient, 10mm at 50° Ambient.
Mounting via 4 x 5mm diameter holes at rear on 110mm x 67mm centres.
Mounting onto 35mm DIN rail with optional rail mounting base.
Full part number is - CUB3A-1E.
Download the IMO Cub Manual from the link below:-