General Electric VAT20 Series AC Inverter for 1.5kW (2HP) 230V 3 Ph motor to 7.5A. Operates in standard VxF and converts fixed frequency single or three phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
From October 2017 the VAT20 series is no longer available. The manufacturer recommends that customers upgrade to the AF-60. See linked products below for equivalent rating.
Size 2: 118mm Wide x 171.7mm Deep x 143.1mm High (excluding grounding plate if fitted). IP20.
Weight: 1.66kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-200Hz
Braking: Minimum 100 Ohm external resistor (not supplied) - use the 'Which Resistor' button on this page.
Integrated Keypad, 1 Analogue Input, 4 Digital Inputs, 1 Analogue Output, 1 Relay Contact set.
Input Current: [not specified]
Input Voltage: 200-240V Single or Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: Class A (Industrial).
Wall mount in clean dry environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space above and below: 120mm, at sides: 70mm, in front: 50mm.
Heat Loss at max output: [not specified].
Mounting via 3 x 4.5mm diameter holes at rear on 108mm x 127.5mm centres. For optional DIN rail mounting kit - see linked products below.
Manufacturer part number is U20N1K5S or 167078.
Download the General Electric VAT20 Inverter Manual from the link below:-