Danfoss VLT Micro Drive FC-280 Series AC Frequency Inverter for 1.5kW (1HP) to 3.2A. Operates in standard VxF and Sensorless Vector and converts fixed frequency 230V Single Phase Input to variable frequency Three phase 230V output to control the speed of a standard AC Induction motor or Permanent Magnet Synchronous Machine.
No Keypad or Display is included - see linked products below for compatible options.
Overload Rating: 160% for 60 seconds
Output Current: 6.8A continuous at 45°C.
Size K1 - 75mm Wide x 168mm Deep x 210mm High. IP20.
Weight: 2.8kg.
Speed Control Range - 0-500Hz
No Braking.
Coated PCBs.
2 x Analogue Inputs, 6 x Digital Inputs (2 digital inputs can be configured as Encoder Inputs) 1 x Digital Input/Pulse Input, 1 x Analogue Output, 1 x Relay Contact set, Modbus RTU.
Programmable from a PC via Danfoss MCT 10 Set-up Software. No Display.
Input Current - 4.4A at 200V - 240V continuous, 7.0A for 60s.
Input Voltage - 200 - 240V Single Phase -15% to +10% at 50-60Hz +/- 5%.
EMC Filters to IEC/EN 61800-3 1st Environment (Domestic).
Cubicle mount; IP20
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 97.5W.
Mounting via 4 x 4.5mm diameter holes at rear on 198mm x 60mm centres
Full part number is -134X3056
Typecode: FC-280P1K5S2E20H1XXCXXXSXXXXAX
Download the Danfoss FC280 Manual from the link below:-