Bosch Rexroth IndraDrive Fc AC Frequency Inverter for 1.5kW (2.0HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 7.0A. Simple to set-up and converts fixed frequency single phase or three phase 230V input to variable frequency three phase 230V for a standard AC Induction motor.
No Keypad included - see linked products below for keypad options.
Size B: 73mm Wide x 153mm Deep x 226mm high (260mm high when included wall mounting brackets are fitted) IP20.
Weight: 1.8kg (approx).
Overload - 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range - 0-400Hz.
Braking - To 62 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Features - 2 x Analogue/Digital Inputs, 5 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets, RS232, RS485.
DC Bus terminals for Common Bus energy saving applications.
Programmable from a PC via 'IndraWorks' software and PC Cable - see linked products below.
Input Current - 15.2A (230V Single Phase), 9.8A (230V Three Phase).
Input Voltage - 200-240V Single or Three Phase ±10% at 50/60Hz ±5%.
EMC Filters to IEC/EN 55011 Class A 2nd Environment (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - [not specified].
Mounting via 2 x detachable heatsink-mounted brackets at rear (top and bottom). 1 x 5.5mm diameter hole per bracket.
Full part number is FCS01.1E-W0015-A-02-NNBV or R911311059.
Download the IndraDrive Fc Manual from the link below:-