Bosch Rexroth EFC 5610 Series AC Inverter for 1.5kW (2HP) 230V 3 Ph motor to 6.1A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Dimensions: Size C 95mm Wide x 170mm Deep x 206mm High.
Enclosure Rating: IP20.
Weight: 1.9kg.
1.5kW, 6.1A with 150% overload for 60 seconds (High Overload).
Speed Control Range: 0-400Hz.
Dynamic Braking (DBr): 100% duty to minimum 95 Ohm, maximum 100 Ohm external resistor (not supplied), see the linked products below or use the 'Which Resistor' button on this page.
Features: Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 16.2A.
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
Mounting: Cubicle mount via 35mm DIN rail or 4 x 4.5mm diameter holes at rear on 66mm x 196mm centres.
Ambient Temperature: Rated 45°C.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss: 120W at maximum output.
Part Number: EFC5610-1K50-1P2-MDA-7P-NNNNN-NNNN or R912005741.
Replaces the IndraDrive Fc where the application permits