Your Cart is empty!
List Price: £1,084.62
Condition: New with Warranty Brand: ABB, Range: ACS480
ABB ACS480 series AC Inverter for 0.75kW 230V 3ph motor to 4.8A at high overload, or 1.1kW to 6.6A when fan/pump rated. Operates in standard VxF or Sensorless Vector Control and converts 230V 1ph input to 230V 3ph to control the speed of a standard AC Induction Motor or Permanent Magnet motor. Size R1: 73.5mm (W) x 205mm (H) x 208mm (D), 223mm (H) with Cable clamp. IP20 Weight: 1.7kg. Overload: 150% x 60 seconds every 10 minutes (High Overload) Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated) Speed Control Range: 0-599Hz Dynamic Braking (DBr): 0.75kW continuous for minimum 32.5 Ohms, maximum 145 Ohms external resistor (not supplied – see linked products below). Removable Keypad with USB mini-B socket for PC connection included. I/O module included: 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for Modbus RTU (EIA-485) communications. Terminals for dual channel SIL3/PL e safe torque off (STO) included. DC bus terminals included. Input Current: 14.5A. Input Voltage: 200-240 Vac, +10%/-15%, 48 to 63 Hz EMC compliance: EN 61800-3: 2004 + A1: 2012 Category C2 (Industrial or restricted Domestic) for motor cables up to 10m Cubicle mount. Rated Ambient: 50°C Ventilation space above: 75mm, below: 75mm, at sides: 0mm. Heat Loss at max output: 93W. Mounting via 35mm DIN rail or 4 x 5mm diameter slotted holes at rear
Manufacturer part number is ACS480-04-06A9-1
IRV 300 100R FL500 J 1.5KV
Order code: 24545
10+ in stock
RDUM-01
(3AXD50000040008)
Order code: 31538
1 in stock
2+ normally 12 weeks
FENA-01
Order code: 21625
2+ normally 32 weeks
FENA-21
(3AUA0000089109)
Order code: 28822
2+ normally 2 weeks
FDNA-01
Order code: 20864
Delivery 4 weeks
FMBT-21
(3AXD50000049964)
Order code: 31540
FPBA-01
(68469325)
Order code: 20087
2 in stock
3+ normally 5-7 days
DPMP-EXT
(3AXD50000010763)
Order code: 30670
2+ normally 5-7 days
We've sent you a message containing a confirmation link. Click the link to complete the process.