ABB ACS355 Solar AC Frequency Inverter for 1.5kW 230V 3 Phase motor in VxF or Sensorless Vector control to 9.8A. Simple to set-up for use with 3 phase 230V input and a three phase 230V standard AC Induction motor or permanent magnet synchronous motor. Including Solar Pump Firmware option 827
No Keypad included.
N827 Solar option included
Size R3 - 266mm Wide x 294mm Deep x 436mm high (477mm high including fastenings and clamp plate).
Enclosure IP66
Weight: 13kg.
Overload - 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range - 0-600Hz.
Braking at full load for 16 seconds every 120 seconds to 30 Ohm minimum, 100 Ohm Maximum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features - 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
'Safe Torque Off' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current - 14.3A.
Input Voltage - 200-240V Three Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 110.5W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 6mm diameter holes
Full part number is - ACS355-03E-09A8-2+N827+B063 (3AUA0000157204)
Download the ABB ACS355 Manual and Solar suppliment from the link below:-