This product is no longer in production. Direct replacement is the ACS355 - see linked products below.
ABB ACS350 AC Frequency Inverter for 0.55kW (0.75HP) 230V 3 Ph motor in VxF or Vector control to 3.5A. Simple to set-up for use with 3 phase 230V input and a three phase 230V standard AC Induction motor.
No keypad included.
R0 Size - 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm) IP20 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/500Hz.
Braking - To 70 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Features - 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable via 'Flashdrop' module.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current - 6.1A.
Input Voltage - 200/240V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 53.7W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is - ACS350-03E-03A5-2