Invertek Optidrive E2 IP20 series AC Inverter for 1.1kW (1.5HP) 230V three phase motor in VxF control to 5.8A. Converts fixed frequency single phase 115V input to variable frequency 230V to control the speed of a standard AC Induction Motor.
Size 2: 110mm Wide x 150mm Deep x 221mm High. IP20.
Weight: 1.7kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: To 50 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Brake Resistor Calculator' link at the bottom of this page.
Integrated operator keypad with 6-digit LED display, 2 Analogue/Digital Inputs, 2 Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU communications over RS485 or PC Connection to OptiTools Studio software.
Input Current: 25A
Input Voltage: 110-115V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters.
Cubicle mount.
Rated 50° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 75mm
Ventilation space at sides: 50mm
Mounting via 35mm DIN rail or 4 x holes for M4 bolts at rear on 63mm x 209mm centres.
Manufacturer part number is ODE-2-21015-1H042.
Made in the UK.
Download the Invertek Optidrive E2 Manual from the link below:-