Invertek Output Choke, IP20 75A for Optidrive E3, P2 and Eco AC Inverters

OPT-2-M3075-20

Order Code: 28543
Photo of Invertek Output Choke, IP20 75A for Optidrive E3, P2 and Eco AC Inverters
Available to Order
Delivery 5-7 working days

List Price: £992.10

£565.50
(excl. VAT)
£678.60
(inc. VAT )
Price break
per unit
1+
£565.50

Condition: New with Warranty
Brand: Invertek, Range: Optidrive Accessories

Three Phase Output Choke for use with Size 4 & 5 Invertek Optidrive Inverters to 75A. Compatible with E3, E2, P2 and HVAC models.

For installation between the Inverter and Motor when long cable runs are required. Allows the maximum cable length to be increased to 200% of the value stated in the manual for shielded cable, or 300% of the value shown for unshielded cable. ie. 100m and 150m if the maximum cable length is stated as 50m or 50m and 75m if the maximum cable length is stated as 25m.

Note: Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.

This product can be used to reduce motor noise and will help to reduce Voltage reasonance at the motor, should it occur.

Rating:-
0.22mH x 75A maximum continuous
Overload is 150% for 60 seconds every hour.
500V Three phase maximum
IP20 enclosure rating

190mm wide x 223mm high x 92mm deep.
Connections for up to 2.5mm² cable

Also known as a dv/dt filter.

Part number is OPT-2-M3075-20

Download the Installation Guide from the link below:-