Three Phase Output Choke for use with Size 1 Invertek Optidrive Inverters to 8A. Compatible with E3, E2, P2 and HVAC models rated from 0.37kW to 1.5kW.
For installation between the Inverter and Motor when long cable runs are required. Allows the maximum cable length to be increased to 200% of the value stated in the manual for shielded cable, or 300% of the value shown for unshielded cable. ie. 100m and 150m if the maximum cable length is stated as 50m or 50m and 75m if the maximum cable length is stated as 25m.
Note: Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.
This product can be used to reduce motor noise and will help to reduce Voltage reasonance at the motor, should it occur.
Rating:-
2mH x 8A maximum continuous
Overload is 150% for 60 seconds every hour.
500V Three phase maximum
IP20 enclosure rating
95mm wide x 107mm high x 61mm deep.
Connections for up to 2.5mm² cable
Also known as a dv/dt filter.
Part number is OPT-2-M3008-20
Download the Installation Guide from the link below:-