Universal Brake Chopper for use with any 400V 3 ph Inverter having access to DC+ & DC- terminals and a suitable external resistor.
Rated: 33kW Peak or 11kW Continuous.
Rating: 45A Peak or 15A Continuous.
DC Bus Voltage: 450V to 800V.
Minimum resistance: 16 Ohms. See the resistors linked below or use the 'Which Resistor' button at the bottom left of this page.
Simple to set-up (requires no adjustments) and provides braking for an existing Inverter Drive that might be tripping on 'Over-Voltage' or suffering from an extended stop ramp.
Cubicle Mount in a clean environment.
Rated at 40C Ambient.
Dimensions: 82.5mm Wide x 220mm Deep x 150mm high.
Mounting: 2 x 6mm holes at 138mm at the top and bottom, 40.5mm across from the left side.
Part number is - BC2.1-33/11