Marelli - 0.75kW (1HP) 230V/400V 3ph 4 Pole AC Motor for Speed Control - B14 Face Mounting

MAA80MB4 B14

Order Code: 19999
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: Marelli, Range: MAA Three Phase Aluminimum

Marelli 80 Frame - 0.75kW 3ph 4 Pole Face mounting (small flange) AC Motor for 230V and 400V 3 phase supply.

Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output or a fixed frequency mains supply at 50Hz.

Can be used over a 20:1 Speed Control range from 140RPM to 2800RPM, with suitable de-rating at the lower speeds.

Fixed mains supply output is 0.75kW (1HP) x 1385RPM at 230V or 400V x 50Hz 3ph.

Full Load Current - 3.4A at 230V, or 2A at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.78 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.

160mm Wide x 290mm Long x 217mm high overall in its IP55 enclosure.
Flange mount (B14) on M6 tapped holes at 100mm pcd with 80mm dia spigot in the 120mm diameter flange.
Shaft is 19mm dia x 40mm with 6mm wide key.
Shaft side load is 69kg for 20,000hrs life (6204-2Z bearing)
Weight is 10kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - MAA80MB4-B14

For Variable Speed use…

Part Time Output when Inverter powered is...
2.6Nm - 0.75kW (1HP) x 2800RPM at 100Hz
6.9Nm - 0.75kW (1HP) x 1385RPM at 50Hz
6.9Nm - 0.5kW (0.67HP) x 700RPM at 25Hz
6.9Nm - 0.1kW (0.067HP) x 140RPM at 5Hz

Continuous Output when Inverter powered is...
2.6Nm - 0.75kW (1HP) x 2800RPM at 100Hz
5.2Nm - 0.75kW (1HP) x 1385RPM at 50Hz
4.3Nm - 0.32kW (0.42HP) x 700RPM at 25Hz
2.6Nm - 0.037kW (0.05HP) x 140RPM at 5Hz