Marelli - IE2 1.5kW (2HP) 4 Pole 230V/400V 3ph B3 Foot Mount AC Motor - MAQ90L4

MAQ90L4 B3

Order Code: 21680
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: Marelli, Range: MAQ Three Phase IE2 Aluminium

Marelli - High Efficiency 90 Frame 1.5kW 3ph 4 Pole AC Motor for 230V or 400V x 50Hz 3 phase supply.  Use with Variable Frequency Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.

Fixed mains supply output:  1.5kW (2HP) x 1440RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply output:  15:1 Speed Control range - 144RPM to 2160RPM for 5Hz to 75Hz, with suitable de-rating at the lower speeds. Very Low Speeds, down to 1Hz are possible with correct setting of the 'Boost' parameter (see the 'How To' Blog above).

Full Load Current - 6.2A at 230V, or 3.6A at 400V.
Efficiency is 82.9% at full load, 83.1% at 75% load and 81.8% at 50% load.
Power Factor is 0.73 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection, or set ‘two at one side’ for 400V 'Star' connection.
Terminal Box for 2 x M20 Glands.

176mm Wide x 350mm Long x 240mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from shaft shoulder.  Feet can be removed and re-located on either side, for left or right side terminal box positions.
Shaft is 24mm dia x 50mm with 8mm wide key.
Shaft side load is 97kg for 20,000hrs life (6205-2Z bearing)
Weight is 17kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - MAQ90L4 (MAQ 90 l4)

For Variable Speed use…
Part Time Output when Inverter powered is...
4.97Nm - 1.5kW (2HP) x 2880RPM at 100Hz
9.95Nm - 1.5kW (2HP) x 1440RPM at 50Hz
9.95Nm - 0.75kW (1HP) x 720RPM at 25Hz
9.95Nm - 0.15kW (0.2HP) x 144RPM at 5Hz

Continuous Output when Inverter powered is...
6.63Nm - 1.5kW (2HP) x 2160RPM at 75Hz
9.95Nm - 1.5kW (2HP) x 1440RPM at 50Hz
8.46Nm - 0.64kW (0.85HP) x 720RPM at 25Hz
4.97Nm - 0.075kW (0.1HP) x 144RPM at 5Hz

Download the MAQ Technical Catalogue and dimension drawings from the link below...

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.

You may also be interested in...

Photo of WEG RW27D-1 2.8-4A Thermal Overload Relay for CWM Contactors

WEG RW27D-1 2.8-4A Thermal Overload Relay for CWM Contactors

RW27-1D3-U004

Order code: 22599

10+ in stock

£19.65
£19.19
£18.74
1+
5+
10+
Photo of LS Starvert iC5 1.5kW 230V 1ph to 3ph AC Inverter Drive, C3 EMC

LS Starvert iC5 1.5kW 230V 1ph to 3ph AC Inverter Drive, C3 EMC

SV015iC5-1F

Order code: 19437

Obsolete Product, a replacement may be available

 
 
Photo of Bosch Rexroth EFC3600 1.5kW 400V 3ph AC Inverter Drive, C3 EMC

Bosch Rexroth EFC3600 1.5kW 400V 3ph AC Inverter Drive, C3 EMC

EFC3600-1K50-3P4-MDA-7P-NNNN

(R912003764)

Order code: 24090

Obsolete Product, a replacement may be available

 
 
Photo of Invertek PCE - 1.5kW 230V 1ph to 3ph Motor Mounting AC Inverter

Invertek PCE - 1.5kW 230V 1ph to 3ph Motor Mounting AC Inverter

OPC-1-12150-1KB1N

Order code: 23120

2 in stock

3+ normally 28 weeks

£283.00
1+