TEC Electric - 15kW 3ph 4 Pole High Efficiency (IE2) Foot Mounting (B3) Cast Iron 160L Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 15kW (20HP) x 1445RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 144RPM to 2880RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 25.92A at 400V.
Power Factor is 0.92 when mains connected at 50Hz.
Efficiency is 90.8%
314mm Wide x 650mm Long x 402mm high overall in its IP55 enclosure.
Foot mount on 15mm holes at 254mm wide x 254mm centres 108mm back from the shaft shoulder.
Shaft is 42mm dia x 110mm with 12mm wide key.
Weight is 144kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 15.043TECCB3-IE2
For Variable Speed use:-
Part Time Output when Inverter powered is...
49.40Nm - 15kW ( 20.11HP) x 2900 RPM at 100 Hz
98.79Nm - 15kW ( 20.11HP) x 1450 RPM at 50 Hz
98.79Nm -7.5kW ( 10.05HP) x 725 RPM at 25 Hz
98.79Nm - 1.5kW (2.01HP) x 145 RPM at 5 Hz
Continuous Output when Inverter powered is...
70.6Nm -15kW ( 20.11HP) x 2030 RPM at 70 Hz
98.79Nm -15kW ( 20.11HP) x 1450 RPM at 50 Hz
83.97Nm - 6.38kW ( 8.55HP) x 725 RPM at 25 Hz
49.40Nm - 0.75kW (1.01HP) x 145 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.