Nordac SK 205E Series 400V 3ph AC Frequency Inverter mounted on 1.5kW (2HP) 90 Frame 4 Pole Motor to 4A. Operates in VxF or Sensorless Vector control. Simple set-up and ready to run from its default settings for decentralized drive applications.
Inverter: Frame 1, Motor: SK90L/4.
Size: 174mm wide x 290mm high x 251mm length overall (excluding shaft). IP66 (motor is IP55).
Mounting: Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from shaft shoulder.
Shaft: 24mm diameter x 50mm length with 8mm keyway.
Overload - 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range - 0Hz to 400Hz. 10:1 Speed Control range from 140RPM to 1400RPM, with suitable de-rating at the lower speeds.
Braking - To 200 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
1 Analogue Input, 4 Digital Inputs, 1 Digital Output, RS232 and RS485 Interfaces.
Input Current - 3.7A (typical).
Input Voltage - 380-500V Three Phase -20%/+10% at 50-60Hz ±5%.
EMC Filters for the 2nd Environment (Industrial).
Full part number is - SK 205E-151-340-A-C (SK205E-151-340-A-C).
Download the Nord SK 200E Manual and Drawings from the links below:-