ABB ACS880 Fully Regenerative AC Inverter Drive for a 30kW (40HP) 400V 3 Ph motor to 61A at high overload. Operates in VxF or Sensorless Vector as standard and full Closed-loop Flux Vector or Direct Torque Control (DTC) when an optional Encoder Feedback card is fitted. Converts fixed frequency Three Phase 400V input to variable frequency 400V to control speed and recover energy from a standard AC induction motor, permanent magnet synchronous motor, servo motor or synchronous reluctance motor.
Dimensions: Size R6, 252mm Wide x 382mm Deep x 771mm High
Enclosure Rating: IP21.
Rating: 61A (30kW) at Heavy Duty, 68A (37kW) at light overload, 103.7A available contously without overload.
Heavy Duty Overload: 150% x 60 seconds every 5 minutes
Light Overload: 110% x 60 seconds every 5 minutes
Speed Control Range: 0-500Hz.
Braking: Fully Regenerative Four Quadrant Control, with energy recovery back to the mains supply.
Operator Keypad (Assistant Control Panel) with USB included as standard.
2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 2 Digital Inputs/Outputs, 1 Digital Input Interlock (DIIL), 3 Relay Contact Sets, terminals for RS-485/Modbus RTU communications or ABB Drive-to-drive (XD2D) link, terminals for dual channel SIL3 safe torque off (STO), 24V AC/DC input to power the control unit when the main supply is disconnected.
Three option slots for communications, I/O, encoder feedback, or safety modules.
Input Current: [as output current]
Input Voltage: 380V to 415V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC EN61800-3:2004 2nd Environment Category C3 (Industrial)
Mounting: Cubicle mount
Rated 40°C Ambient.
Part Number: ACS880-11-072A-3+E200-IP21
Part number suffix +E200 denotes an internal factory fitted C3 EMC Filter is included.
Download the ABB ACS880-11 Manual from the links below:-