Sprint 3200i 8A 1Q 230V/400V 1ph AC to DC Drive, Isolated, 001

Sprint Electric 3200i - 8A Single Quadrant Isolated DC Thyristor Drive for motor speed and torque control.
415V AC supply - 2.2kW(3.0HP) at 320V DC.
240V AC supply - 1.1kW (1.5HP) at 180VDC.
(Low voltage variants are available see links below)

Size: 200mm Wide x 110mm Deep x 150mm High. IP00
Weight: 2.0Kg

001 - includes optional isolated auxiliary terminals 51 to 68.

Adjustments:-
Max & Min Speed
Ramp Time
Maximum Current
Stability
Adjustable IR compensation for improved AVF speed regulation
Switch selectable Tacho or Armature voltage feedback
Selectable dual voltage ac supply
+/- 24V and 12V supllies 24ma and 10ma rated respectively
Aux speed trim input +ve and –ve
Aux setpoint,speed and ramp analogue outputs
Aux stop/start for stall condition
Zero speed or Stall relay volt free changeover contact
Auxiliary stall and zero speed external relay drivers
Run inhibit Note  Field and power terminals remain live . (RUN must not be relied on during hazardous operations)

Input Current: 8A to 12A (depending on motor inductance).
Input Voltage: 240V or 415V single phase +-10% at 50/60Hz.
Field Rating: 2A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)
Armature Form Factor: Typical form factor 1.5 (load dependant).
Stall protection @ 150% included

Wall mount in clean environment or cubicle mount.
Rated at -10° to 40°C Ambient.
Heat Loss at Max output: 25W.
Mounting via 2 x M5 by 50mm @ 140mm.

Manufacturer part number is 3200i/8/LL-001

Download the Sprint 1600-3200i manual below:-