WEG Automation CWM Series Three Pole Contactor to 25A (AC3) or 45A (AC1) for a Power Circuit to be switched by a 24V DC Control Circuit.
Rating:-
- Motor DOL Starter (AC3): 25A for a 11kW motor x 400V.
- Inverter or DC Thyristor Drive supply (AC1 - Thermal): 45 for up to 18.5kW x 400V.
Size 2: 45mm Wide x 117mm Deep x 81mm High. IP10.
Front-mounting external Auxiliary Contact adds 29mm to depth when fitted.
Side-mounting external Auxiliary Contact adds 11.5mm to width when fitted.
Mounting: 35mm DIN rail or 4 x 4.5mm slots at rear on 35mm x 50-72.5mm centres.
Terminals: Screw type. Max 10mm².
Weight: 0.39kg
Current Rating: 25A (AC3) or 45A (AC1)
Maximum Voltage: 690V 50/60Hz 1-3 Phase
Coil Voltage: 24V DC 50/60Hz x 69.5VA (pull-in), 4-7.2VA (sealing)
Main Contacts: 3 (NO)
Auxiliary Contacts, 1 x Normally Open (External, Front-mount). Provision for 4 x additional external auxiliary contacts, see linked products below.
Standards: IEC/EN 60 947. DIN VDE 0660. UL. CSA
Lifespan (Electrical): 1,200,000 operations.
Lifespan (Mechanical): 10,000,000 operations.
Note:-
- AC1 Current Rating is for use with applications where open and closing operations are current free and the Current rating is not exceeded at any time.
- AC3 kW Rating is based on standard 2 pole or 4 pole motors.
- Coil connections can be made at either the top or bottom of the contactor to simplify replacement of existing contactors.
Manufacturer Part Number is CWM25-10-30C03
Download full dimensional drawings for the WEG CWM range from the link below:-