Siemens SINAMICS PM230 - 5.5kW/7.5kW 400V 3ph - AC Power Module for G120 Series Inverter Drive

Siemens SINAMICS PM230 Power Module for 5.5kW (7.5HP) 400V Three Phase Motor to 13.2A at High Overload or 7.5kW (10HP) to 18A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.

Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.
Size FSB - 180mm Wide x 249mm Deep x 540mm High (excluding Control Unit). IP55

Overload: 150% x 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload.
Overload: 110% x 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated.
Braking: None

Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 14A at High Overload, 19A when Fan/Pump rated.
EMC Filters: Class B (Industrial)

Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 65mm
Ventilation space above: 100mm
Ventilation space below: 100mm
Ventilation space at sides: 0mm
Heat Loss at max output: 0.24kW
Mounting via 4 x 8.5mm diameter slotted holes at rear on 285mm x 600mm centres.

Manufacturer part number is 6SL3223-0DE27-5BG1

Download the Siemens SINAMICS G120 Power Module PM230 Start Guide from the link below:-