WEG/WEG 0.37kW (0.5HP) Variable Speed Inverter Drive and Motor Kit for Single Phase 230V supply. Consists of WEG CFW300 Inverter, WEG W22 Series motor, 3m motor cable, supply fuse and pendant for easy operation.
WEG (CFW300) AC Frequency Inverter. Converts Single Phase 230V to Three Phase 230V for a maximum output current of 2.6A with variable frequency from 0Hz to 50Hz for constant torque and above 50Hz in constant power, subject to application.
IP20 rated for cubicle installation only.
EMC Compliance: suitable for Domestic, Commercial or Industrial use.
Supply: 200V to 240V AC 1Ph, (-15% to +10%). 50/60Hz (48Hz to 62Hz). Max 5.7A input.
Overall size: Size A, xxxmm high x 70mm wide x 190mm deep.
WEG W22 Series, 71 Frame 4 Pole 3 Phase 230V/400V dual-voltage motor – change links to "Delta" for use with the CFW300 Inverter included.
B3 Foot Mount on 4 x 7mm holes on 112mm x 90mm centres.
Output: 20:1 Speed Control range from 139RPM to 2493RPM, with suitable de-rating at the lower speeds.
Control Station supplied with Start pushbutton, Stop Pushbutton and Potentiometer for speed setpoint. Control Station, Pushbuttons, Potentiometer, Glands and multicore control cable are supplied as loose items, assembly is required.
Overall size (excluding cable): 150mm wide x 79mm high x 88mm deep. Enclosure Rating: IP66.
High Speed Fuse and Fuse Holder:
Single High Speed AC Fuse Holder and Power Circuit off-Load Isolator. Supplied with 20A Barrel Fuse (10mm x 38mm type). To be fitted in the live feed to the inverter.
Size (excluding cables): 88.5mm high x 82mm deep when open (58mm when closed) x 17.5mm wide.
IP20 rated for cubicle installation.
Supplied with 3m length fully screened Industrial braided SY cable with terminated connectors to suit both Motor and Inverter.
For full product details, more photos or to order these items individually, see linked products below:-