WEG CFW500 Series AC Inverter for 15kW (20HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 31A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.
Dimensions: Size D 180mm Wide x 166.5mm Deep x 306.6mm High.
Overload: 150% x 60 seconds, 200% x 3 seconds
Speed Control Range: 0-500Hz
Braking: to 18 Ohm minimum external resistor (not supplied). Use the 'Which Resistor' button on this page.
Features: Standard IO plugin module included. Other modules are available, see linked products below.
1 Analogue Input, 4 Digital Inputs, 1 Analogue Output, 1 Digital Output, 1 Relay Contact set, DC Bus Terminals, Terminals for RS485 Modbus RTU Communications.
Programmable via PC using free Superdrive G2 software (USB IO module required, see linked products below).
Input Current: 37.8A.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz (48-62Hz).
EMC Compliance: integrated filters to IEC EN61800-3 Category C2 (Industrial and restricted domestic). Can be disabled if required via a switch located under the front cover.
Mounting: Cubicle mount via 4 x slotted holes at rear for M5 bolts on 125mm x 290mm centres.
Ambient: Rated 40°C.
Ventilation space in front: 50mm, above: 40mm, below: 50mm, at sides: 40mm.
Heat Loss at max output: 500W.
Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.
Part number: CFW500D31P0T4DB20C3. CFW500 D 31P0 T4 DB20C3; 12698510 or 12608840 (without control card) (CFW500 D 31P0 T4 DB20C3H00)
Download the WEG CFW500 Manual, Parameter Reference and Programming Guide from the links below:-