WEG CFW11 IP21 4kW/5.5kW 400V 3ph AC Inverter Drive, HMI, DBr, STO, C2 EMC

CFW11 0013 T4 OFAYZ (11304857)

Order Code: 27190
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: WEG, Range: CFW11

WEG CFW11 Series AC Inverter with Safe Torque Off feature for 4kW (5HP) 400V 3 Ph motor to 11A at high overload, or 5.5kW (7.5HP) to 13.5A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.

Size: Frame A, 145mm Wide x 227mm Deep x 247mm high. IP21
Weight: 6.3kg.

Overload - 150% x 60 seconds every 10 minutes, 200% x 3 seconds every 10 minutes (High Overload)
Overload - 110% x 60 seconds every 10 minutes, 150% x 3 seconds every 10 minutes (Fan/Pump Rated)
Speed Control Range: 0-300Hz (depending on control mode)
Braking: Minimum 75 Ohm minimum external resistor (not supplied)  - see the Resistor options linked below or use the 'Which Resistor' button on this page.

2 Analogue Inputs, 6 Digital Inputs, Safe Torque Off terminals, 2 Analogue Outputs, 3 Relay Contact sets, USB Port (Type B), Real time clock, internal DC Choke.
DC Bus terminals for DC supply or common bus energy saving applications.
Programmable from a PC via USB cable and free 'G2 Superdrive' software.

Input Current: 9.5A (High Overload), 11.5A (Fan/Pump Rated), via 20A High Speed Fuse.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±3%
EMC Filter: Integrated, to IEC EN61800-3 C2 (restricted domestic) for 5m motor cable length, C3 (industrial) for longer lengths.
​RFI Filters components can be disabled by the removal of 2 grounding screws if required.

Safety Function: Safe Torque Off (STO) suitable in applications up to Cat. 3 / PL d acc. to EN ISO 13849-1 and SIL 2 acc. to IEC 62061 / IEC 61508

Wall mount in clean environment, cubicle mount or flange mount.
Rated 50°C Ambient.
Ventilation space in front: 10mm.
Ventilation space above: 25mm.
Ventilation space below: 25mm.
Ventilation space at sides: 30mm (0mm with top cover removed).
Heat Loss at max output: 220W (High Overload), 280W (Fan/Pump rated)
Mounting via 4 x M5 bolts at rear on 115mm x 250mm centres.

Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.

Manufacturer part number is CFW11 0013 T4 OFAYZ, CFW110013T4OFAYZ  Internal code is 11304857.
Download the WEG CFW11 Manual, Parameter Reference and Programming Guide from the links below:-

You may also be interested in...

Photo of WEG CFW11 IP21 4kW/5.5kW 400V 3ph AC Inverter Drive, HMI, DBr, C2 EMC

WEG CFW11 IP21 4kW/5.5kW 400V 3ph AC Inverter Drive, HMI, DBr, C2 EMC

CFW11 0013 T4 OFAZ

(10574793)

Order code: 19252

Obsolete Product, a replacement may be available

 
 
£325.00
1+
£345.00
1+
£383.00
1+
£403.00
1+
Photo of Dynamic Brake Resistor, 100 Ohms, 500 Watts

Dynamic Brake Resistor, 100 Ohms, 500 Watts

IRV 500 100R FL500 J 1.5KV

Order code: 24551

6 in stock

7+ normally 7 weeks

£88.00
£83.60
£79.20
1+
10+
50+
Photo of WEG CFW11 Remote Mounting Kit for Keypad - RHMIF-01

WEG CFW11 Remote Mounting Kit for Keypad - RHMIF-01

RHMIF-01

(11010521)

Order code: 21803

10+ in stock

£14.13
1+
Photo of Single Turn 10k IP65 Potentiometer, Knob and Dial for 22mm Hole

Single Turn 10k IP65 Potentiometer, Knob and Dial for 22mm Hole

LA42DWQ-22 10K

Order code: 31252

50+ in stock

£20.00
£18.00
£17.00
1+
5+
20+
Photo of USB A to B Programming Lead for PC to Inverter (3m)

USB A to B Programming Lead for PC to Inverter (3m)

USB-A-B-3M

Order code: 25531

1 in stock

2+ normally 5-7 days

£7.00
1+
Photo of WEG ENC-01 Encoder Feedback Card with Signal Repeater for CFW11 (Slot 2)

WEG ENC-01 Encoder Feedback Card with Signal Repeater for CFW11 (Slot 2)

ENC-01

Order code: 23392

2 in stock

3+ normally 15 weeks

£110.18
1+
Photo of WEG EtherNet IP Interface Module for CFW-11 Inverters (Slot 4)

WEG EtherNet IP Interface Module for CFW-11 Inverters (Slot 4)

ETHERNET/IP-05

(10933688)

Order code: 19341

3 in stock

4+ normally 15 weeks

£324.88
1+
Photo of WEG Profinet interface module for CFW-11 Inverters (Slot 4)

WEG Profinet interface module for CFW-11 Inverters (Slot 4)

PROFINETIO-05

(11550548)

Order code: 25687

3 in stock

4+ normally 15 weeks

£531.10
1+
Photo of WEG RS485 Communications Module for CFW-11 Inverters (Slot 3)

WEG RS485 Communications Module for CFW-11 Inverters (Slot 3)

RS485-01

(11008102)

Order code: 21025

9 in stock

10+ normally 15 weeks

£50.85
1+
Photo of WEG CANopen / DeviceNet Comms Module for CFW11 or CFW700 Inverter (Slot 3)

WEG CANopen / DeviceNet Comms Module for CFW11 or CFW700 Inverter (Slot 3)

CAN-01

(11008106)

Order code: 19627

1 in stock

2+ normally 15 weeks

£89.84
1+
Photo of WEG RS232-01 - RS232C Communications Module for CFW-11 Inverters (Slot 3)

WEG RS232-01 - RS232C Communications Module for CFW-11 Inverters (Slot 3)

RS232-01

(11008103)

Order code: 21026

1 in stock

2+ normally 15 weeks

£45.23
1+
Photo of WEG Profibus Comms Module for CFW11 or CFW700 Inverter (Slot 3)

WEG Profibus Comms Module for CFW11 or CFW700 Inverter (Slot 3)

PROFIBUS DP-01

(11045488)

Order code: 20913

2 in stock

3+ normally 15 weeks

£123.00
1+
Photo of WEG DeviceNet Interface Module for CFW-11 Inverters (Slot 4)

WEG DeviceNet Interface Module for CFW-11 Inverters (Slot 4)

DEVICENET-05

(11008158)

Order code: 20469

2 in stock

3+ normally 15 weeks

£324.88
1+
Photo of WEG CFW11 IO Expansion Module, 2 x AI, 2 x DI, 2 x AO, 2 x DO (Slot 1)

WEG CFW11 IO Expansion Module, 2 x AI, 2 x DI, 2 x AO, 2 x DO (Slot 1)

IOB-01

(11008099)

Order code: 33823

2 in stock

3+ normally 15 weeks

£133.91
1+
Photo of WEG IOE-01 - PTC temperature transducer with 5 sensor inputs for CFW11 (Slot 1)

WEG IOE-01 - PTC temperature transducer with 5 sensor inputs for CFW11 (Slot 1)

IOE-01

(11126732)

Order code: 23394

2 in stock

3+ normally 15 weeks

£163.85
1+
Photo of Mersen 20A 690Vac 14mm x 51mm gR High Speed Fuse

Mersen 20A 690Vac 14mm x 51mm gR High Speed Fuse

F1017203

(FR14GR69V20)

Order code: 31491

10+ in stock

£7.00
1+
Photo of Mersen (Ferraz) 3 Way Ultrasafe Fuse Holder for Three 14mm x 51mm Fuses to 50A

Mersen (Ferraz) 3 Way Ultrasafe Fuse Holder for Three 14mm x 51mm Fuses to 50A

US143

(N331143)

Order code: 25943

8 in stock

9+ normally 5-7 days

£28.00
1+
Photo of WEG CFW11 and CFW700 NEMA Conduit Kit with Power Cables Shield, Size A

WEG CFW11 and CFW700 NEMA Conduit Kit with Power Cables Shield, Size A

KN1A-01

(11010787)

Order code: 24448

5 in stock

6+ normally 15 weeks

£17.52
1+