WEG Automation CFW-08 A1 Plus AC Frequency Inverter for 5.5kW (7.5HP) 400V 3 Ph motor in VxF or Sensorless Vector Control control to 13A. Simple to set-up for a standard AC Induction motor.
The CFW08 range has been replaced with the CFW500. See linked products below for CFW500 of equivalent rating and alternatives.
Size 3 - 143mm Wide x 165mm Deep x 203mm high. IP20.
Overload - 150% x 60 seconds every 10 minutes.
Speed Control Range - 0-300Hz.
Braking - To 33 Ohm minimum external resistor (not supplied) - see the Resistor Options linked below or use the 'Which Resistor' button on this page.
Features - Removable keypad, 2 x Analogue Inputs, 4 Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets.
Programmable from a PC via 'SuperDrive' Software.
EMC Filters - Class A to 2nd Environment C2 (Industrial).
Input Current - 15A.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±2Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above - 40mm
Ventilation space below - 50mm.
Ventilation space at sides - 30mm.
Ventilation space in front - 50mm.
Heat Loss at max output - 218W.
4 x Mountings for M5 bolts at rear.
Full part number is - CFW080130T3848EOA1FAZ - Sold under other names including Eurotherm Drives (Invensys) as ERCFW080130T3848EOA1FAZ
Download the WEG CFW-08 Manual and Easy Start Guide from the links below:-