SSD 690+ AC Frequency Inverter without EMC Filter 3.0kW (4HP) and 4.0kW (5.5HP) to 9.5A for 400V 3 Ph motors in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Overload - 150% x 60 seconds.
Speed Control Range - 0/120Hz (default), 0/240Hz or 0/480Hz.
Braking (DBr) - 100% duty into minimum 100 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
4 x Analogue Inputs, 8 Digital Inputs, 3 Analogue outputs, 3 Digital outputs (relay contacts).
Input Current - 12.6A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 16A to suit input bridge at 340A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 80mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 200W.
Size B - 177mm Wide x 181mm Deep x 233mm High.
Mounting - M4 screw fixings on 129.5mm x 223mm centres.
Weight is 4.3kg.
Full part number is - 690-431950B0-B00P00-A400
Legacy part number is - 690PB-0040-400-3-0-0011-UK-0-0-0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 690PB-0040-400-3-0-0011-UK-0-0-0-0-0. Can be specified as 690PB-0040-400-3-0-0010-FR-0-0-0-0-0 if required.
The menu uses simple to understand English-language terms to describe its selection and functions. The default is English, but can be changed to German, French, Spanish, Italian, Polish, Swedish and Portuguese, by going to 'System', then 'Languages' and selecting the language required.
Replaces:- 620STD/0040/400/0010/UK/ENW/0000/000/B0/000/000, 620COM/0040/400/0010/UK/ENW/0000/000/B0/000/000, 620ADV/0040/400/0010/UK/ENW/0000/000/B0/000/000, 584SV/040/400/0011/UK/000/0000/B0/000/000, 581/040/6/0000/0/0/0/1/00
Download the 690P Technical and Software manuals from the links below...