Mitsubishi FR-A700 7.5kW/11kW 400V - AC Inverter Drive Speed Controller

FR-A740-00250-EC (169802)

Order Code: 20800

Obsolete product. Alternatives may be available - see linked products below

Brand: Mitsubishi
Range: FR-A700

Mitsubishi FR-A700 Series AC Frequency Inverter for 7.5kW (10HP) 400V 3 Ph motor to 17A at high overload, or 11kW (15HP) to 25A when Fan/Pump rated, operates in VxF, Sensorless Vector control or full closed-loop Flux Vector Control (with optional Encoder Feedback Card). Simple set-up and ready to run from its default settings.

Size 2 - 220mm Wide x 170mm Deep x 260mm High. IP20

Overload - 150% x 60 seconds, 200% x 3 seconds (High Overload)
Overload - 110% x 60 seconds, 120% x 3 seconds (Fan/Pump Rated)
Speed Control Range - 0.2Hz to 400Hz.
Braking - To 75 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.

3 Analogue Inputs, 12 Digital Inputs, 2 Analogue Outputs, 5 Digital Outputs, 2 Relay Contact Sets, integrated PLC functions and RS485 Modbus-RTU
Input Current - 22.3A at high overload or 32.8A when Fan/Pump rating set.
Input Voltage - 380-480V Three Phase +10% -15% at 50/60Hz ±5%
EMC Filters to BSEN61800-3 for the 2nd Environment (Industrial).

Wall mount in clean environment or cubicle mount.
Rated -10° to 50°C Ambient (40° when Fan/Pump rated).
Ventilation space in front 50mm
Ventilation space above and below - 100mm.
Ventilation space at sides - 50mm.
Heat Loss at max output - 250W.
Mounting via 4 x 6mm diameter holes at rear on 195mm x 245mm centres.

Full part number is - FR-A740-00250-EC

Download the A700 Manual, Installation Guide and Progamming Manual from the links below:-

You may also be interested in...

Photo of Mitsubishi FR-A800 7.5kW/11kW 400V AC Inverter Drive

Mitsubishi FR-A800 7.5kW/11kW 400V AC Inverter Drive



Order code: 26519

1 in stock

2+ normally 5-7 days