LSLV S100 series AC Inverter for 75kW (100HP) 400V 3 Ph motor to 152A at high overload or 90kW (120HP) to 169A when Fan/Pump rated. Operates in VxF or Sensorless Vector mode and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.
Size 9: 325mm Wide x 309mm Deep x 550mm High.
Overload: 150% x 60 seconds, (High Overload) Overload: 120% x 60 seconds (Fan/Pump rated)
Speed Control Range: 0-400Hz
Braking: Minimum 6 Ohm minimum external resistor (not supplied) - see the products linked below or use the 'Which Resistor' button on this page.
Built-in Safe Torque Off (STO)
Integrated Keypad, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Outputs, 1 Digital Output, 1 Relay Contact sets, DC Bus +/- Terminals.
'Safe Torque Off' (STO) function to SIL 2 (EN 61508) via Digital Input.
Input Current: 143A at high overload, or 160A when fan/pump rated.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3, (Class A) Industrial.
Cubicle mount in a clean environment.
Rated 50°C Ambient (high overload), 40°C ambient (fan/pump rated).
Ventilation space above and below: 100mm.
Ventilation space at sides: 50mm.
Ventilation space between: 2mm.
Heat Loss at max output: [not specified]
Mounting via 4 x 9mm diameter holes at rear on 275mm x 524.5mm centres.
Manufacturer part number is LV0750S100-4CONDS.
Download the LS S100 30kW to 75kW Manual from the links below:-