Invertek Optidrive E2 IP55 - 2.2kW 230V 1ph to 3ph - AC Inverter Drive Speed Controller (Switched)

ODE-2-22220-1KB4S

Order Code: 19715
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: Invertek, Range: Optidrive E2

Invertek Optidrive E2 IP55 AC Frequency Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF control to 10.5A. Simple to set up and converts single phase 230V input to 3 phase 230V for a standard AC Induction motor.

From October 2014 the IP55 rating is no longer available and has been replaced with an improved IP66 model - see linked products below for equivalent.

IP55 / NEMA 12 enclosure for harsh environments. Switched - Includes Enable Switch, Local Potentiometer for speed control and Drive Fwd/Rev switch.

Frame 2 Size - 165mm Wide x 176mm Deep x 310mm High, IP55

Overload - 150% Output Current (15.75A) x 60 seconds, 175% x 2 seconds
Speed Control Range - 0/500Hz.
Braking - To 50 Ohm minimum external resistor (not supplied) - see the resistor Options linked below or use the 'Which Resistor' button on this page.

Features - 2 Analogue/Digital Inputs, 2 x Digital Inputs (4 total), 1 x Analogue/Digital Output, 1 Relay Contact set.
Parameter setting via integral keypad, remote keypad (optional) or from a PC via 'OptiStore' software (RS485 to USB cable required - see linked products below)
Parameter setting from compatible Windows based PDA or Smartphone cable-free via 'OptiWand' software

EMC Filters to EN61800-3 category C2 for 1st environments (domestic) for screened cable lengths of up to 5m (add Optifilter for lengths above 5m).
EMC Filters to EN61800-3 cat C3 (2nd environment - Industrial) for screened cable lengths of up to 25m.

Input Current - 28.8A.
Input Voltage - 200-240V ± 10%

Wall mount using 4 x M4 screw fixings at rear.
4 x Gland Holes (2 x dia 25mm power, 1 x dia 22mm in center, 1 x 17mm in cover).
Rated at 40°C Ambient.
Ventilation space required above and below (150mm below if component is heat-producing).
Ventilation space at sides - 0mm (Drives can be mounted side by side).

Full part number is - ODE-2-22220-1KB4S

Made in the UK.

Download the Invertek Optidrive Manual from the link below:-

You may also be interested in...

Photo of Invertek Optidrive E3 IP66 Indoor/Outdoor 2.2kW 230V 1ph to 3ph AC Inverter, DBr, SW, C1 EMC

Invertek Optidrive E3 IP66 Indoor/Outdoor 2.2kW 230V 1ph to 3ph AC Inverter, DBr, SW, C1 EMC

ODE-3-220105-1F4B

Order code: 31663

5 in stock

6+ normally 4 weeks

£379.05
1+