Eaton DE1 Series AC Inverter for 0.75kW (1HP) 230V 3 Ph motor in VxF control to 4.3A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Designed for easy installation, the DE1 will operate from its default settings or can configured using an optional plug-in module, see products linked below.
Dimensions: Size FS1 45mm Wide x 168mm Deep x 230mm High.
Enclosure Rating: IP20.
Weight: 1.06kg.
Overload: 150% x 60 seconds every 10 minutes.
Overload: 200% x 1.875 seconds every 10 minutes.
Speed Control Range: 0-300Hz.
Braking: None.
Features: 1 Analogue/Digital Input, 3 Digital Inputs, 1 Relay Contact set (NO), RJ45 port for RS485 Modbus RTU Communications.
Input Current: 11.3A.
Input Voltage: 200V-240V Single Phase ±10% at 50-60Hz ±5%..
EMC Compliance: IEC EN61800-3 Cateory C1 (Domestic) for motor cable lengths to 5m. C2 (restricted Domestic) to 10m, C3 (Industrial) to 25m. Filters can be disabled using a jumper if required.
Mounting: Cubicle mount via 35mm DIN rail or 4 x holes at rear for 5mm screws on 25mm x 220mm centres.
Ambient: Rated 50°C.
Ventilation space in front: 15mm, above and below: 50mm, at sides: 0mm.
Heat Loss: 32W at maximum output.
Part Number: DE1-124D3FN-N20N.
Made in the UK.
Download the Eaton DE1 Manual and Instruction Leaflet from the links below:-