Toshiba VF-nC3 Series AC Inverter for 1.5kW 230V 3 Ph motor in VxF or Sensorless Vector control to 7.5A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC induction motor
Size: 105mm Wide x 156mm Deep x 142mm high
IP Rating: IP20. Must be mounted in a suitable enclosure
1.5kW, 7.5A with overload, 150% for 60 seconds or 200% for 0.5 seconds
Speed Control Range: 0.1Hz to 400Hz
Braking (DBr): None
Fixed Keypad with Front Mounted Potentiometer
1 x Analogue Input, 1 x Analogue Output, 4 Digital Inputs, 1 Relay Contact set
Fieldbus: Modbus RTU communications over RS485 included. RJ45 connector
Input Current: 17.8A
Input Voltage: 200-240V single phase +-10% at 50-60Hz ±5%
If mains supply is greater than 500kVA an AC Mains Choke is required
EMC Filters to EN61800-3 to the 1st Environment C1 (Domestic) for cable lengths up to 5m
EMC Filters to EN61800-3 to the 2nd Environment C2 (Industrial) for cable lengths up to 10m
Cubicle mount. Inside the cubicle Pollution Degree Level 2 must not be exceeded
Rated at 40°C Ambient (60°C Maximum ambient with suitable de-rating)
Ventilation space above and below: 100mm
Ventilation space at sides: 30mm
Heat Loss at max output: 83W
Mounting: 2 x 5mm holes on 93mm x 118mm centres. Not suitable for DIN rail mounting
Manufacturers Part Number VFNC3S-2015PL. Replaces VFNC1S-2015PL