ABB Drives ACS 150 AC Variable Frequency Drive Controller for 0.37kW (0.5HP) 230V 3 Ph motor in VxF control to 2.4A. Converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V output to control the speed of a standard AC Induction motor.
**This product has been superseded please see new generation products below. If you require assistance migrating to the new products then please contact us**
Dimensions: R0 Size, 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 70 Ohm Minimum, 390 Ohm Maximum external resistor (not supplied). See the Resistors linked below, or use the 'Brake Resistor Calulator' on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters: EN61800-3 to the 2nd Environment C3 (Industrial). See linked products below for external 1st Environment (Domestic) EMC Filter.
Can be installed with supplies protected by RCD Type A.
Input Current: 6.1A, or 4.5A when supplied via an 8mH choke.
Input Voltage: 200V/240V single phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail, or use the screw fixings for side or rear mounting. Wall mount in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 37W at max output.
Part number: ACS150-01E-02A4-2 (68581940)
EAN: 6410038079307
Replaces the ACS100 that is no longer manufactured. (ACS101-K18-1, ACS101-K25-1, ACSK37-K37-1, ACS101-K75-1)
Download the ABB ACS150 Installation Guide and Manual from the link below:-