Eaton DC1 IP20 series AC Inverter for 1.5kW (2HP) 400V three phase motor in VxF or sensorless vector control to 4.1A. Converts fixed frequency three phase 400V input to variable frequency 400V to control the speed of an AC Induction Motor.
Size 2: 107mm Wide x 152mm Deep x 231mm High. IP20.
Weight: 2.6kg.
Output Current Rating: 4.1A (Continuous)
Overload: 150% x 60 seconds, 175% x 3.75 seconds every 10 minutes.
Speed Control Range: 0-500Hz.
Braking: To 250 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Fixed operator keypad with 7 segment LED display.
2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set.
RJ45 socket for OP bus, Modbus RTU or CANopen communications over RS485.
Input Current: 5. 6A
Input Voltage: 380-480V ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN61800-3:2004 Category C2 (Industrial and restricted Domestic).
Cubicle mount.
Rated 50° Ambient.
Ventilation space in front: 15mm
Ventilation space above and below: 75mm
Ventilation space at sides: 50mm
Mounting via 4 x M4 fixings on 75mm x 215mm centres.
Manufacturer part number is DC1-344D1FB-A20CE1.
Previous Version: DC1-344D1FB-A20N
Download the Eaton DC1 Manual from the link below:-