Invertek Optidrive E3 IP66/ Nema 4X Outdoor Series AC Inverter for 0.37kW (05HP) 230V 3 Ph motor to 2.3A. Operates in VxF, Sensorless Vector. Converts fixed frequency Three Phase 230V input to variable frequency 230V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
Size 1: 232mm high x 161mm wide x 179mm deep.
Enclosure Rating: IP66.
Weight: 3.1kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-500Hz.
No Braking
Features: On board Mains isolator, Fwd/Rev selector and speed potentiometer. 2 Analogue Inputs, 3 Digital Inputs, 2 Analogue/Digital Outputs, 2 Relay Contact Sets.
DC Bus terminals for DC supply or common bus energy saving applications.
Terminals for Safe Torque Off (EN62061 SIL Level 2), RJ45 RS-485/Modbus RTU/CANopen communications socket.
Input Current: 3.4A
Input Voltage: 200-240V Three Phase ±10% at 50-60Hz ±5%
EMC Filters: No Filter
Mounting: Wall mount or Cubicle mounting via 4 x slotted holes at rear for M8 screws on 00mm x 125mm centres.
Ambient: Rated 40°C.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 100mm
Ventilation space at sides: 10mm
Part Number: ODE-3-120023-301B.
Place of Manufacture: Made in the UK.
Download the Invertek Optidrive Manual and Advanced User Guide from the links below:-